0102-10 Analog Digital IO

Example Projects > 0102 Wago PFC100 PFC200 > 0102-10 Analog Digital IO

Wago PFC100/PFC200 assembly with analog an digital I/O

This example illustrates the setup for a Wago PFC100/PFC200 assembly containing both analog and digital I/O modules.

Prerequisites

  • REXYGEN Runtime Core and WagoDrv module must be installed and running on the target device to run the example
  • The number and order of I/O modules must comply with the attached PNG file.

Timing of the project

  • The algorithm runs each 100 milliseconds (0.1 s). See the EXEC function block,
    tick x ntick0 = 0.02 x 5 = 0.1 s
  • Communication with I/O modules via Kbus is performed each 20 milliseconds (0.02 s). See the WG function block, tick x factor = 0.02 x 1 = 0.02 s

Running the example

  • The *exec.mdl file is the project main file. Open it with REXYGEN Studio.
  • Compile and download the project to the target device.
  • Connect to the HMI using your web browser, e.g. http://192.168.1.100:8008 (use the IP address of your target device!)

Documentation

Additional information

  • Visit the REXYGEN webpage for more information about the example projects and developing advanced automation and control solutions using REXYGEN.